IDEAL Networks SignalTEK NT - Optical SFPs and Software Update

SignalTEK NT 156875 Iss 3
User Guide Page 54
Ports (continued)
Optical
Supported SFPs
The following SFP types are supported. Use of other types of SFP is
possible but correct operation is not guaranteed.
SFP Type SX
Manufacturer Part # - Avago AFBR-5705PZ / Apac LM28-C3S-TI-N-DD
Speed – 1Gb/s
Fiber Type - Multimode
Wavelength - 850nm
Connector Type - LC Duplex
SFP Type LX
Manufacturer Part # - Avago AFCT-5705PZ / Apac LS38-C3S-TC-N-DD
Speed - 1Gb/s
Fiber Type - Singlemode
Wavelength - 1310nm
Connector Type - LC Duplex
SFP Type ZX
Manufacturer Part # - Apac LS48-C3U-TC-N-DD
Speed - 1Gb/s
Fiber Type - Singlemode
Wavelength - 1550nm
Connector Type - LC Duplex
Fixed Setup
Speed - 1Gb/s
MAC - Factory set
Function
Performance test with connected Near-End Unit
- Regenerate all traffic addressed to this unit’s MAC address
- Swap Source/Destination MAC
Software update
Via USB key
General
Power
Battery
Supported Types - Standard Power module (4 x AA NiMH cells)
Autonomy - Up to 5 hours (power module only)
Recharge time - 3 hours (Power module only)
(continued)