IDEAL Networks SignalTEK NT - Remote Unit Ports and Functions

SignalTEK NT 156875 Iss 3
User Guide Page 53
Displays (continued)
Optical Link LED
Use - ON indicates Optical link UP
Location - Adjacent to SFP socket, nearest front of tester
Color - Green
Optical Activity LED
Use - Flashing indicates Optical link activity
Location - Adjacent to SFP socket, nearest back of tester
Color - Green
Link LED
Use - ON indicates connection to Near-End Unit
Location - Front
Color - Green
Status LED
Use - Flashing green indicates test in progress with Near-End Unit
- Green indicates test completed and passed
- Red indicates test completed and failed
Location - Front
Color - Red/Green
10M LED
Use - ON indicates 10Mb/s line rate
Location - Front
Color - Green
100M LED
Use - ON indicates 100Mb/s line rate
Location - Front
Color - Green
1000M LED
Use - ON indicates 1000Mb/s line rate
Location - Front
Color - Green
Ports
RJ45
Fixed Setup
Speed - Auto negotiated
Duplex –- Auto negotiated
MAC - Factory set
Functions
Controlled automatically by connected Near-End Unit
Performance test with connected Near-End Unit
- Regenerate all traffic addressed to this unit’s MAC address
- Swap Source/Destination MAC
Wiremap test with connected Near-End Unit
- Function identical to Active Remote.
(continued)