IDEAL 4855 - Page 46

- 46 -
IDEAL 4855 • IDEAL 5255 • IDEAL 6655
A
Clamping
Blade
OK
OK
Paper cutting test. If the last sheet or several
sheets are not completely cut, gradually turn
the knob for blade depth adjustment (A)
¼ turn to the right until the paper is cut along
the entire length. Do not set too low as blade
will become blunt sooner.
Danger by blade replacement!
Blade must always be covered by the
pressing bar (see picture below at the left).
      .
33.
      .
          
    )A ( 
    ¼     
  .
) 

      
  (
34.
31.
2.
A
1.
,(1.) "I"     
   .  
.(2.)   5 
32.
Pressung
Messer
OK
OK
!    X
     
!     
.)
    (
•
Blade and cutting stick replacement
• •