- 37 -
If the cutting quality decreases:
• Check the cutting depth (see page 46).
• Check the cutting stick (see page 41).
• Replace or grind the blade (see page
37 - 46).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
Purchase the new blade from
Krug & Priester, D -72336 Balingen only.
The blade may only be ground by a
qualied workshop or from the
manufacturer Krug & Priester,
D -72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without pro-
tection. Changing the blade may only be
performed by trained staff.
•
Blade and cutting stick replacement
•
•
46
41
46
37
To Next Page
Loading...
