IDEAL 5255 - Initial Blade Removal Steps

- 38 -
IDEAL 4855 • IDEAL 5255 • IDEAL 6655
3.
2.
1.
•
Blade and cutting stick replacement
• •
Turn the blade depth adjustment screw to
the left until it stops. (Screwdriver found in
tool set (A) or tool holder (B).
Close the safety guard (1.). Lower the
blade by pressing both cutting actuators (2.).
Keep one actuator pressed and turn off the
main switch (3.).
23.
     
(A)   .   
(B)    
24.
3.
2.
1.
.(1.)   
    
(2.   
)
   
.(3.)    
25.
B
A
C
IDEAL 4855 طقف يف ةلآ
.(
C
)
    