IDEAL 5255 - Page 39

- 39 -
B
A
C
26.
  
.
  
.
   
   .
The 3 eccentrics are now exposed and should
be turned counter clockwise to position "0"
with the special wrench and attachable
extension pipe (A) (in the tool set). The slot
must correspond to position "0" (B).
Only IDEAL 4855
Unscrew the blade screws (C) on the right
hand side.
Remove the special wrench. Close the safety
guard, and turn on the main switch until the
blade returns to the home position.
24.
3.
2.
1.
.(1.)   
    
(2.   )
   
.(3.)    
25.
B
A
C
IDEAL 4855 طقف يف ةلآ
.(
C
)
    
•
Blade and cutting stick replacement
• •