IDEAL Classic SE12 FF - User Manual

installation and
servicing
Classic
Your Ideal installation and servicing guide
See reverse for
Classic users guide
SE9 FF, SE12 FF, SE15 FF, SE18 FF,
SE21 FF, SE24 FF & SE30 FF
When replacing any part on this appliance use only spare parts that you can be
assured conform to the safety and performance specification that we require. Do not
use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
For the very latest copy of literature for specification purposes please visit our website
www.idealboilers.com where you will be able to download the relevant information in pdf format.
For details of document amendments, refer to page 3
January 2008 UIN 200 544 A05
200544-5.pmd 20/02/2008, 13:261

IDEAL Classic SE12 FF Specifications

General

Mounting	Wall-mounted
Fuel Type	Natural Gas
Warranty	2 Years
Output Rating	12.0 kW
Dimensions (H x W x D)	700 x 395 x 278 mm
Central Heating Flow Temperature Range	60 - 82 °C

Summary

General

Benchmark Commissioning Checklist

Checklist for installation and commissioning of the boiler.

Gas Supply

Requirements for gas supply and connection to the boiler.

Flue Installation

Guidelines for installing the flue terminal and system.

Electrical Supply

Requirements for electrical connections and safety.

Installation

18 Mounting the Boiler

36 Gas Connection

38 Electrical Connections

44 Commissioning and Testing

Procedures for installation checks and initial lighting.

45 Initial Lighting

Step-by-step guide to lighting the boiler for the first time.

46 Handing Over

Servicing

49 Schedule

69 Heat Exchanger Replacement

Fault Finding

Short List of Parts