EasyManua.ls Logo

IDEAL MINI S24 - User Manual

IDEAL MINI S24
4 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
mini
When replacing any part of this appliance, use only s pare parts that you can be
assured conform to safety and performance specification that we require. Do not use
reconditioned or copy parts that have not been clearly authorised by Ideal Boilers
Your Ideal users g uide
For installation and servicing guide see
reverse of book
users guide
C24,C28,C32
S24,S28

Other manuals for IDEAL MINI S24

Preview: Installation And Servicing
Installation And Servicing60 pages

Questions and Answers

  • E
    Erica WallaceAug 4, 2025
    What to do if my IDEAL MINI S24 is not working for central heating or hot water?
    • A
      Ashley MartinezAug 4, 2025
      First, ensure the boiler has power by checking if the green LED (A) is lit and flashing every 4 seconds. If not, contact your installer as it may not be a boiler fault. Next, check the pressure gauge; it should show a minimum of 1 bar. If it's lower, repressurize to 1 bar using the filling loop. If unsure, contact your installer. Turn off the filling loop tap and press the reset button (D) to reset the boiler. If the pressure continues to drop, contact your installer. Finally, check if the lockout signal lamp (E) is lit. If so, press the boiler reset button (D). If the boiler still doesn't fire, contact your installer.

Summary

Minimum Clearances

Safety

Boiler Controls

To Light the Boiler

Diagnostic Lights

Control of CH Temperature

Control of DHW Temperature

Escape of Gas

Faults

No Heating or Hot Water

Check gas, electricity, switches, and system pressure. Reset boiler if lockout lamp is on.

Troubleshooting - Typical Non Product Faults

Boiler Not Working

Check power supply, water pressure (1 bar), gas supply, and air pressure switch caps.

Boiler Goes Through Ignition Sequence but Will Not Fire

Check lockout signal lamp, press reset button, or check gas supply.

Fan & Pump Run Continuously but No Attempt at Ignition

Mini C Only: Operating for Hot Water but Not for Central Heating

Mini S Only: Operating for Hot Water but Not for Central Heating

Mini S Only: Operating for Central Heating but Not for Hot Water

IDEAL MINI S24 Specifications

General IconGeneral
Boiler TypeCombi
CH Output (kW)24 kW
DHW Output (kW)24 kW
TypeGas
Output24 kW
Dimensions (HxWxD)700 x 395 x 278 mm
FuelNatural Gas
Warranty2 years
MountingWall
Flow Rate (l/min)9.8 l/min

Related product manuals