IDEAL Classic SE24 FF - User Manual

installation and
servicing
Classic
Your Ideal installation and servicing guide
See reverse for
Classic users guide
SE9 FF, SE12 FF, SE15 FF, SE18 FF,
SE21 FF, SE24 FF & SE30 FF
When replacing any part on this appliance use only spare parts that you can be
assured conform to the safety and performance specification that we require. Do not
use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
For the very latest copy of literature for specification purposes please visit our website
www.idealboilers.com where you will be able to download the relevant information in pdf format.
For details of document amendments, refer to page 3
January 2008 UIN 200 544 A05
200544-5.pmd 20/02/2008, 13:261

IDEAL Classic SE24 FF Specifications

General

Output	24 kW
Max. Heat Output (kW)	24 kW
Warranty	2 Years
Fuel Type	Natural Gas
Mounting	Wall Mounted

Summary

Introduction

Current Gas Safety Regulations

Outlines regulations for gas safety in installation and use.

Safe Handling Precautions

Safe Handling of Substances

Boiler Water Connections

Boiler Clearances

Gas Supply Requirements

Flue Installation

Water Circulation System

Water Treatment

Electrical Supply

Open Vent System Requirements - Fully Pumped

Sealed System Requirements

Safety Valve

Requirements for fitting a safety valve in sealed systems.

Expansion Vessel

Requirements for expansion vessel sizing and fitting in sealed systems.

System Filling Procedures

Methods for filling the sealed system and associated procedures.

Boiler Assembly - Exploded View

Determining the Flue Length

Flue Assembly - Exploded View

Preparing the Wall

Cutting the Flue

Fitting the Flue Assembly

Mounting the Boiler

Connecting the Flue to the Boiler

Side Flue Assembly - Exploded View

Preparing the Wall for Side Outlet

Cutting the Flue for Side Outlet

Fitting the Flue Assembly (Side Outlet)

Mounting the Boiler (Side Outlet)

Connecting the Flue to the Boiler (Side Outlet)

Flue Extension Ducts

Fitting the Flue Extension Kit

Gas Connection

Water Connections

Electrical Connections

Pictorial Wiring Diagram

Commissioning and Testing

Electrical Installation Checks

Checks to ensure electrical safety and proper installation.

Gas Installation Checks

Procedures for gas installation testing and purging.

Initial Lighting Procedure

General Checks

Service Schedule

Burner and Air Box Removal

Cleaning Fan Assembly and Flueways

Cleaning Burner and Pilot Assembly

Boiler Reassembly

Gas Pressure Adjustment

Replacement of Parts - General

Overheat Thermostat Replacement

Thermostat, Thermistor Lead & Switch Replacement

Limit Thermostat Replacement

Pilot Burner Replacement

Ignition Electrode and Lead Replacement

Main Burner and Injector Replacement

Gas Control Valve Replacement

Fan Replacement

Air Pressure Switch (APS) Replacement

Printed Circuit Board (PCB) Replacement

Heat Exchanger Replacement

Fault Finding Guide

Burner Assembly Exploded View

Gas Boiler Commissioning Checklist