IDEAL COMBI ESP 24

DISPLAY CODE ON THE BOILER DESCRIPTION ACTION
BCC activation fault Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
BCC fault Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Unconfigured PCB Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Flame loss See Action - Fault Code L 2.
DISPLAY CODE
ON THE BOILER
DESCRIPTION
The boiler is in standby mode awaiting either a central heating call or hot water
demand.
The boiler has a call for central heating / hot water but the appliance has reached the
desired temperature set on the boiler.
The boiler is operating for central heating / hot water.
The boiler is operating in frost mode.
OPERATIONS MODE.
35
FAULT CODES.