EasyManua.ls Logo

IDEAL Concord CXA 80/H User Manual

IDEAL Concord CXA 80/H
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the IDEAL Concord CXA 80/H and is the answer not in the manual?

IDEAL Concord CXA 80/H Specifications

General IconGeneral
BrandIDEAL
ModelConcord CXA 80/H
CategoryBoiler
LanguageEnglish

Summary

Introduction to the Concord CXA/H Boiler

Gas Safety Regulations and Compliance

Outlines mandatory gas safety rules and compliance requirements.

Boiler Dimensions and Installation Clearances

Flue, Gas, and System Connections

Electrical and Control Systems Setup

Electrical Connections

Outlines wiring requirements for the boiler's electrical supply.

Internal Wiring and Control Box Details

Internal Wiring Diagram

Provides a schematic of the boiler's internal electrical connections.

Initial Setup and Testing Procedures

Initial Lighting Procedure

Step-by-step guide for first-time boiler ignition and burner lighting.

Gas Pressure, System Adjustments, and Handover

Gas Pressure Adjustment

How to set manifold gas pressure for optimal performance.

Servicing and Boiler Cleaning

Boiler Servicing and Cleaning Procedures

Detailed steps for routine maintenance and cleaning of the boiler.

Pilot Burner and Electrode Inspection

Guidance on inspecting and cleaning pilot burner and electrodes.

Component Replacement and Servicing

Pilot Burner Assembly Replacement

Step-by-step guide for replacing the pilot burner assembly.

Servicing Specific Components

Spark Electrode and Lead Replacement

Instructions for replacing the spark electrode and its lead.

Flame Detector and Lead Replacement

Instructions for replacing the flame detector and its lead.

Gas Control Valve and Main Burner Replacement

Guides for replacing the gas control valve and main burners.

Burner and Controls Assembly Exploded Views

Control Sensor and Thermostat Replacement

Overheat Thermostat Replacement

Steps for replacing the overheat thermostat assembly.

Control Sensor and Potentiometer Replacement

Guides for replacing control sensors and potentiometers.

Control Box and PCB Replacement

PCB and Combustion Chamber Insulation Replacement

Site Assembly Instructions

Fault Finding - Pilot Ignition Issues

Pilot Will Not Light Troubleshooting

Diagnostic steps for when the pilot light fails to ignite.

Pilot Will Not Stay Lit Troubleshooting

Diagnostic steps for when the pilot light extinguishes.

Fault Finding - Gas and Overheat Issues

Pilot Lit But No Mains Gas Troubleshooting

Diagnosing issues when the pilot is lit but mains gas fails.

Boiler Goes Out on Overheat Thermostat

Troubleshooting steps for boiler shutdown due to overheat thermostat.

Related product manuals