To Next PageTo Next Page
Need help?Do you have a question about the IDEAL ES30 and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| ErP Rating | A |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Warranty | 2 Years |
| Fuel Type | Gas |
| Fuel | Natural Gas |
Overview of the Logic Combi ES boiler's features and function.
Essential safety guidelines, gas safety, and electrical supply requirements.
Installation must be performed by a qualified Gas Safe Engineer or RGII.
Details on voltage, frequency, and fusing required for the appliance.
Key operational and safety considerations for users of the appliance.
Specifies the necessary space around the boiler for safe operation and servicing.
Step-by-step guide to initiating the boiler's ignition sequence.
Method to reset the boiler if it fails to start or encounters an issue.
Explains the different display codes indicating the boiler's operating status.
How to set the boiler for heating and hot water or hot water only.
Adjusting domestic hot water and central heating temperatures.
Using weather compensation for automatic room temperature control.
Measures to prevent the boiler and system from freezing.
Information on overheat protection and flame failure fault codes.
Procedure for re-pressurising the central heating system.
Instructions for unblocking a frozen condensate pipe.
Action to take if a gas leak is suspected.
Guidance on cleaning the appliance and recommended servicing intervals.
Flowcharts to diagnose issues with hot water, central heating, or both.
List of display codes and their corresponding actions for fault resolution.
