To Next PageTo Next Page
Need help?Do you have a question about the IDEAL EXALT Solo 155 and is the answer not in the manual?
General| Model | EXALT Solo 155 |
|---|---|
| Type | Condensing Boiler |
| Fuel Type | Natural Gas |
| Mounting | Wall Mounted |
| Dimensions (H x W x D) | 700 x 395 x 278 mm |
| ERP Efficiency | A |
| Central Heating Output | 3.7 - 15.3kW |
| Domestic Hot Water Output | 3.7 - 15.3kW |
General warning about reading all instructions and potential consequences of non-compliance.
Indicates a hazardous situation that will result in substantial property damage, serious injury, or death.
Specifies materials and guidelines for vent and combustion air piping.
Details approved PVC and CPVC materials for vent and combustion air piping.
Lists approved AL29-4C® Stainless Steel vent manufacturers and components.
Lists approved polypropylene vent manufacturers and components.
Outlines restrictions and requirements for vent system installations.
Details specific restrictions for 2-inch (60 mm) vent systems, including clearances.
Specifies restrictions and installation requirements for rigid polypropylene vent systems.
Details restrictions and installation requirements for flex polypropylene vent systems.
Identifies potential contaminants and areas affecting combustion air quality.
Installation guidelines for direct vent systems through roofs or chimneys.
Guidelines for determining the proper location for vent and combustion air terminations.
Instructions for installing the vent and combustion air piping through the roof.
Specifies fittings and methods for terminating vent/combustion air through the roof.
Instructions for direct vent installation through a sidewall.
Guidelines for determining sidewall termination locations for vent and combustion air.
Instructions for installing direct vent piping through a sidewall.
