IDEAL EVOMAX 2 100 - User Manual

When replacing any part on this appliance, use only spare parts that you can be assured conform to
the safety and performance specification that we require. Do not use reconditioned or copy parts that
have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our website
www.idealcommercialboilers.com where you can download the relevant information in PDF format.
USER GUIDE
EVOMAX 2
30 40 60 80 100 120 150
30P 40P 60P 80P 100P 120P
August 2019
UIN 219417 A02

IDEAL EVOMAX 2 100 Specifications

General

Brand	IDEAL
Model	EVOMAX 2 100
Category	Boiler
Language	English

Summary

Introduction

Safety

Adherence to current Gas Safety regulations for installation and maintenance is mandatory.

Electricity Supply

Important Notes

Crucial operational and safety notes, including casing seal, storage, ventilation, and unauthorized parts.

Minimum Clearances

Settings

Heating Circuits

Flow temperature

Heating Limit

INSTALLER CONNECTIONS

Mains Voltage;230 V 50 Hz

Description of mains supply, demand inputs, and auxiliary output connections for the boiler unit.

Volts Free Contacts

Explanation of multi-function volts free relay outputs for pumps and system indications.

FAULTS

Fault Display

How faults are indicated on the boiler display and how to navigate through various fault screens.

Fault Reset

Procedure to reset a fault after rectification, including actions for multiple faults.

Faults - Hardware (Thermistors, Actuators)

List of hardware faults (thermistors, actuators), their types, and corresponding OpenTherm error codes.

Faults - Temperature Supervisions

List of temperature supervision faults, their error types, and corresponding OpenTherm error codes.

Faults - System (Flame, Fan, Hydraulic, etc.)

List of system faults (flame, fan, hydraulic), their error types, and corresponding OpenTherm error codes.

Faults - Internal System

List of internal system faults, their error types, and corresponding OpenTherm error codes.

GENERAL INFORMATION

To Shut Down the Boiler

To Relight the Boiler

Frost Protection

Boiler Overheat Thermostat

How the overheat thermostat detects issues, what happens on lockout, and when to consult an engineer.

Condensate Drain

Escape of Gas

SYSTEM SET UP INFORMATION