IDEAL LOGIC Combi E 30

USERS GUIDE
RF Electronic Programmable Room Thermostat, 7 day
LOGIC+ Combi, LOGIC Combi & LOGIC Combi E
24, 30, 35
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
204796-6.indd 1 15/12/2011 14:34:22
back

IDEAL LOGIC Combi E 30 Specifications

General

Brand	IDEAL
Model	LOGIC Combi E 30
Category	Thermostat
Language	English

Summary

RF Programmable Room Thermostat Operation and Setup

Setting the Time and Date

Step-by-step guide to configuring the thermostat's time and date settings.

Programming Heating Schedules

Instructions for setting daily heating on/off times and temperature programs.

Adjusting Room Temperature Settings

How to adjust the desired room temperature for comfort and efficiency.

Thermostat Operating Modes

Configuring automatic, continuous on, and continuous off operation modes.

Using the + Hours Function

Guide to using the + Hours feature for extended heating periods.

Receiver Unit and Indicator Lights

Understanding Receiver Unit Signals

Explanation of the boiler-mounted receiver unit and its indicator lights.

Advanced Thermostat Features and Functions

Setting Up Holiday Mode

How to set the thermostat for extended periods away from home.

Timed Hot Water Pre-Heat

Information on the pre-heat feature for efficient hot water delivery.

Optimisation for Heating Efficiency

Details on optimizing heating for comfort and economy based on temperature.

Boiler Fault Code Diagnostics

List of boiler fault codes, error displays, and suggested corrective actions.

Opentherm Communication Protocol

Explanation of how the unit uses OpenTherm for efficient boiler control.

Built-in Frost Protection System

How the thermostat protects against freezing temperatures by maintaining a minimum heat level.

Battery Management and Replacement

Battery Type and Replacement Procedure

Information on required batteries and the procedure for replacement.