LOCATION GUIDELINES
TO FIX THE THERMOSTAT
For correct wireless communication between your boiler and the Touch Thermostat there must be:
• Less than 20 metres
• No more than 2 walls and 1 ceiling
• No large metallic objects (e.g. American fridge/freezer)
• No large mirrors or windows
• No walls running along the RF path
The Thermostat must not be within 1 metre of a WiFi booster / router
To fix the Thermostat:
(a) Fix the wall bracket to the wall using appropriate fixings. Push
the wall bracket cover into place until it clicks.
Place the Thermostat onto the three lugs and slide the
Thermostat down until it clicks.
(b)
Alternatively, the Thermostat can be placed on the desktop stand
by placing it onto the three lugs and sliding it down until it
clicks.
click
(c) If applicable, complete the enclosed SAP Registration Label
and adhere it to the boiler in a position which will be visible for
future inspection.
To Next Page
Loading...
Need help?
General
