ideaPOT WD23-3 User Manual

9
To deactivate the alarm
• Go to Alarm Setting to switch ' o
n
A1/2/3' to '-- A1/2/3', then the bell
symbol disappears in Normal Display
Mode.
To adjust alarm volume
• In Normal Display Mode, press and hold
'RETURN' for 3 seconds until a beep is
heard.
• Turn 'SET' to switch between 'V 0', 'V 1',
'V 2' and 'V 3' (from low to high).
• Briefly press 'RETURN' or 'SET' to go
back to Normal Display Mode.

ideaPOT WD23-3 Specifications

General

Brand	ideaPOT
Model	WD23-3
Category	Clock
Language	English