7
Using The Alarm
To set the alarm
• Maximum of 3 alarms can be set at
different time, displaying as 'A1' (Alarm
1), 'A2' (Alarm 2), 'A3' (Alarm 3).
• On display, a bell symbol followed by a
number (1, 2 or 3) indicates which alarm
is active
1. Press and hold 'ALARM' for 3 seconds
until a beep is heard.
2. Turn 'SET' to change the symbol '--' to
'o
n' to activate Alarm 1, or leave it as '--
' to deactivate Alarm 1. Press 'SET' to
confirm and go to hour setting.
3. Turn 'SET' to set hour, press 'SET' to
confirm and go to minute setting.
4. Turn 'SET' to set minute, press 'SET' to
confirm and go to Alarm 2 setting.
5. Repeat step 2, 3, 4 to set Alarm 2 and
Alarm 3 successively.
6. After all 3 alarm settings, set Weekday
Alarm (displaying as 'E'). Turn 'SET' to
choose between '-- E' and 'o
n E', then
press 'SET' to return to Normal Display
Mode.
To Next Page
Loading...
General