5
First Time Setup
1. Switch on the clock with MAIN SWITCH.
2. Press and hold 'TIME' (the button at the
back of the clock) for 3 seconds until a
beep is heard. Turn 'SET' to change the
value of the flashing item. Press 'SET' to
confirm and go to the next item.
3. After successively setting year, month,
date, hour, minute, clock format (24/12H),
temperature unit (℃/F), the clock returns
to Normal Display Mode.
4. Briefly press 'RETURN' to switch Sound
Activated Display on/off (explained on
page 6).
Please note:
• 'SET' works both as a rotary knob and a
button to press.
• At any point of setting, press 'RETURN' to
go back to Normal Display Mode.
• During setting, the clock returns to Normal
Display Mode if no operation is performed
in 60 seconds.
To Next Page
Loading...
General