11
Charging The Clock
• The clock can be left plugged in to use, or
please fully charge it before use.
• Use the provided USB cable to connect the
clock to a USB socket (either a device or a
USB plug).
• It takes approximate 3
1
2
� hours to fully
charge the clock.
• Whilst charging, CHARGING INDICATING
LIGHT is on.
About The Battery Life
• Using the clock with Sound Activated
Display on, battery can last for months.
• When display is set to stay on permanently,
battery life is shortened.
• When not using, use 'MAIN SWITCH' to
switch off the clock.
• This clock memorizes all settings even
when it is switched off.
Please note: setting might be needed after
a long time without charging.
• A brighter display uses more power.
• When the battery level is low, the display
flashes as a reminder of charging the clock.
To Next Page
Loading...
General