IDEC FC4A-C10R2 - Troubleshooting Diagram 3

29: TROUBLESHOOTING
29-10 « FC4A MICROSMART USER’S MANUAL »
Troubleshooting Diagram 3
The ERR LED is on.
Clear error codes using WindLDR.
See Note below.
END
See page 29-3.
Identify the error code and correct
the error.
YES
Note: Temporar y errors can be cleared to restore normal operation by clearing
error codes from WindLDR. See page 29-2.
Is the ERR LED
turned off?
NO