Need help?Do you have a question about the IDEC FT1A Series and is the answer not in the manual?
General| Programming Software | WindLDR |
|---|---|
| Type | Programmable Logic Controller (PLC) |
| Display | LCD (varies by model) |
| Communication Ports | RS232C/RS485 (built-in), USB (programming), Ethernet (optional) |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Model | FT1A Series |
Emphasizes potential severe personal injury or death from improper operation.
Highlights risks of personal injury or equipment damage from inattention.
Overview of the manual's content and scope regarding SmartAXIS.
Details compliance with European, North American, and Marine standards.
Describes the SmartAXIS as a compact programmable controller with powerful functions.
Highlights key features like high-speed counters, HMI, and communication capabilities.
Covers advanced features like Catch Input, Interrupt Input, and High-speed Counter.
Details the various communication capabilities via USB, Ethernet, and expansion ports.
Identifies and describes the physical components of SmartAXIS Pro and Lite models.
Provides detailed electrical specifications for AC power type inputs.
Explains SD card usage, specifications, and file system details for data logging.
Details the functions and specifications of communication cartridges like RS232C and RS485.
Explains the function and specifications of the memory cartridge for user program storage.
Specifies suitable and unsuitable environments for SmartAXIS installation.
Details wiring procedures and precautions for connecting input and output devices.
Explains how to connect AC and DC power supplies, including inrush current.
Guides on launching and starting the WindLDR programming software.
Details how to select the correct PLC type within the WindLDR software.
Provides a step-by-step guide for creating a simple ladder or FBD program.
Explains the process of downloading the user program to the SmartAXIS via USB or Ethernet.
Describes how to monitor the PLC operation and I/O status in real-time.
Explains how to start and stop the SmartAXIS operation using various methods.
Covers configuration of special functions like Run/Stop Control, Memory Backup, and Input Configuration.
Details the function, modes, and external inputs for high-speed counters.
Explains how to protect user programs from unauthorized access via password or prohibition.
Covers setting the watchdog timer to prevent system resets due to long scan times.
Guides on configuring network settings for Ethernet communication, including IP addresses.
Lists and describes the basic instructions for ladder programming.
Lists and describes the advanced instructions for ladder programming.
Lists and describes the available Function Blocks (FBs) for FBD programming.
Lists functions like downloading programs, monitoring values, and system software upgrades.
Details connecting and performing maintenance via a USB port.
Explains communication via RS232C/RS485 expansion ports.
Covers setting up and performing maintenance over an Ethernet connection.
Explains serial communication setup for RS232C/RS485 with external devices.
Details the system setup and cable connections for RS232C communication.
Details the system setup and cable connections for RS485 communication.
Explains configuring the SmartAXIS as a user communication client for server communication.
Explains configuring the SmartAXIS as a user communication server for client access.
Covers Modbus RTU communication using expansion ports via RS-232C/RS-485.
Details how to configure the SmartAXIS as a Modbus master.
Details how to configure the SmartAXIS as a Modbus slave.
Explains configuring SmartAXIS as a Modbus TCP client for Ethernet communication.
Explains configuring SmartAXIS as a Modbus TCP server for client access.
Covers configuring SmartAXIS as a remote I/O master for expanding I/O points.
Covers configuring SmartAXIS as a remote I/O slave for expanding I/O points.
Details the WindLDR configuration steps for a remote I/O master.
Details the WindLDR configuration steps for a remote I/O slave.
Explains how to read error details using WindLDR and the PLC Status dialog box.
Provides procedures to clear error codes after resolving the issue.
Provides a comprehensive guide to diagnose and resolve common problems.
Addresses issues with the Power/Run Status LED not being on or flashing.
Addresses issues when inputs do not operate normally.
Addresses issues when outputs do not operate normally.
Addresses issues with communication between WindLDR and SmartAXIS.
Addresses issues when frequency measurement does not work.
Addresses issues with data not being transmitted in user communication mode.
Addresses issues with data not being received correctly in user communication.
Addresses issues with Modbus RTU master communication not working.
Addresses issues with WindLDR and SmartAXIS not communicating.
Addresses issues with Remote I/O communication.
Information on managing and upgrading the SmartAXIS system software.
Provides steps to upgrade the SmartAXIS system software using WindLDR.
Detailed instructions for installing the USB driver on Windows XP, Vista, 7, and 8.
Describes communication cables and their connector pinouts for SmartAXIS connectivity.
Explains how to upload and download user programs to/from the memory cartridge.
Guides on configuring network settings for SmartAXIS communication via Ethernet.
To Next Page
