In standby mode, press to access the
During programming, press to cancel
and exit without making changes.
In standby mode, press and hold to
power the handset on/off.
turn the handset ringer on/off.
Press and hold to add a dialling pause
when dialling or entering numbers into
In standby mode or during a call, press
to initiate an intercom call or transfer a
call.
⑭
R
In standby mode, press to access the
Lights up in Red when a handset is on
the base to indicate it is charging.
handsets. Press the button again, or
any key on the handset to turn off the
page signal.
Press and hold to start registration