6.0 Product Certification ID’s
6.1 FCC Certification ID - MBPTSKPSC-00
6.2 IC Certification ID - 7485A-TSKPSCR0
7.0 Installation details
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes,
and the authorities having jurisdiction.
7.1 Parts List
• TS Contact Keypad reader -1
• Screws (A #6-18X1.5" SS) - 4Nos – Back Plate mounting screws for Wall
• Snake Eye Screw (SMF #6-32X5/16” SS) – 1 No- Top casing mounting security screw
• Screws (SMF #6-32x3/8" SS) - 3 No’s - 1 casing to back plate mounting screw and 2 Junction
Box mounting screws
• Nylon anchor plug -4 Nos
• 6 pin phoenix plug (Phoenix connector version only) – 2 Nos
• Back Plate
7.2 Recommended Infrastructure
• All cabling and wiring shall be UL Listed and/or UL Recognized
• Cable Wiegand - 22AWG Shielded cable or better. (Cable P No: ALPHA WIRE, P/N
1299/10C)
• Cable RS485 - 24AWG STP or better
shall comply with UL2556 VW-1
• Power Supply - Class 2 Linear DC PSU - 12 V, 1A min.
(for uL compliant installations)
ES1 / PS2 Linear DC PSU - 12 V, 1A min.
(for IEC 62368 compliant installations)
To Next Page
Loading...
