@2020 iDFTECH
12
2. Attitude mode (SWB switch in the middle position)
When the remote-control switch mode (SWB) switch is set to the attitude stabilization mode position, the
stick is unlocked, and the throttle midpoint is taken up. due to the advanced algorithm of DJI NAZA-M-V2
flight control. In indoor or windless environment, it is easy to hover or to set a high manoeuvring flight without
controlling the throttle stick.
When the flight control ‘attitude’ stabilization mode is enabled, the GPS module provides no assistance.
3. Return mode (SWB switch in the bottom position)
When the motor is started for the rst time, the main controller will record this position as the return point. If
the aircraft is more than 10 meters away from home, the aircraft will automatically rise to 20 meters and return.
4. Intelligent Direction Control Mode (SWC-IDC Switch)
If you turn on the IDC function, be sure to know the flight forward (heading locked flight) and the return point
(the return point locked flight).
There are two methods, automatic recording and manual recording for recording the forward and return points
of the flight - one of them can be used. When the heading/return point is recorded, the LED is successfully
recorded with a flashing green light.
When manually recording the forward and return points, do not switch between closing and return point lock, which may
cause the heading lock to be re-recorded.
To Next Page
Loading...