idi Aspect 100-4T - Page 35

Operator Manual Aspect 100-4T and ISR
L100-2843 Rev. E www.imagediagnostics.com 35
Guidance and Manufacturer’s Declaration- Emissions, All Equipment and Systems:
Table 1
This equipment is intended for use in the electromagnetic environment specified below.
The customer or user of this equipment should ensure that it is used in such an
environment.
Emissions Test
Compliance
Electromagnetic Environment – Guidance
RF Emissions
CISPR 11
Group 1
This equipment uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
not likely to cause any interference in nearby electronic
equipment.
RF Emissions
CISPR 11
Class A
This equipment is suitable for use in the professional
healthcare facility environment.
Harmonics
IEC 61000-3-2
Class A
Flicker
IEC 61000-3-3
Complies