1. Before you start
a) Please ensure that you have submitted the online activation form at
b) Once this is done, you will receive the required files to configure you
modem; this will include the option file (R12345.opt) and your IP details.
c) You will also need the corresponding version of iSite:
Evolution W2A ( C- Band) : iSite 12.0.0.0
Evolution W3A/W6 S2 : iSite 12.0.0.0
Evolution AM22: iSite 12.0.0.0
Infiniti Sesat2/W3A/W6 S1 : iSite 12.0.0.0
It is very important that the correct version is used depending on what
satellite the modem in on; if you are unsure which version to use, please
contact support
The above software can be downloaded from
http://www.wafa.ae/en/vsat/support/evolution
2. Connecting to the modem
a) Connect an RJ45 cable from the LAN port on the modem to a hub or switch
(the interface runs at 100mbps/full duplex) the to a PC
To Next Page
Loading...
