How to fix blurry images on Idis DC-D Security Camera?
If the images from your Idis Security Camera appear blurry, start by ensuring the lens is clean. Use a soft cloth or brush to gently remove any dirt or smudges. Next, confirm that the lens is properly focused, adjusting it during daytime for optimal clarity. Finally, check for overly bright light sources affecting the image and adjust the camera's position or angle to minimize the glare.
What to do if I lost the admin ID and password for my Idis Security Camera?
If you've lost your admin ID and password for your Idis Security Camera and can't connect to it, you'll need to perform a factory reset. Keep in mind that this will revert all settings, including network settings, to their factory defaults. After the reset, remember to note down the new admin ID and password for future reference.
Why I can't see live videos on my Idis DC-D Security Camera?
If you are unable to see live videos from your Idis Security Camera, first check the camera's power status to ensure it is properly powered on. Then, verify the network connection status of both your computer and the network camera to ensure they are connected to the same network.
Why are the images blinking on my Idis DC-D Security Camera?
If your Idis Security Camera images are blinking, it might be due to the camera pointing directly at the sun or a fluorescent lamp. Try adjusting the camera's angle to avoid these direct light sources.
What to do if my Idis DC-D won't turn on?
If the main unit of your Idis Security Camera won't turn on, check the power cable connection to make sure it's securely plugged in. Also, verify that the power outlet is working correctly.
Why does the video color appear incorrect on my Idis DC-D?
If the video color appears incorrect on your Idis Security Camera, check the white balance settings. If you're using the Auto option, remember that it might take some time for the white balance to adjust automatically.
Why I am unable to launch IDIS Web for my Idis Security Camera?
If the IDIS Web login screen isn't loading, check which version of Microsoft Internet Explorer you're using. IDIS Web may not launch properly on versions 8.0 or below.
What to do if PoE switch isn't being recognized by Idis DC-D Security Camera?
To address a PoE switch that isn't being recognized by your Idis Security Camera, check the grounding status of the I/O device connected to both the camera and the PoE switch. If they aren't grounded, ground them and try again.
Why are my Idis Security Camera images blurry?
If your Idis Security Camera images are blurry, ensure the lens is clean using a soft cloth or brush. Also, make sure the lens is in focus by adjusting it during daytime. If there's too much light, adjust the camera's position or angle.
What to do if I can't see live videos from my Idis DC-D?
If you can't see live videos from your Idis Security Camera, check the camera's power status and the network connection status of both your computer and the camera.
Essential safety guidelines for operating the camera, covering handling and environment.
Statement regarding the product's compliance with FCC rules for digital devices.
Detailed list of the IP camera's capabilities and functionalities.
List of items provided in the product package, with model variations.
General description of the camera's appearance and design variations.
Identification and description of key internal and external camera components.
Explanation of ports for audio, alarm, network, and cable routing.
Step-by-step guide to restore the camera to its default factory settings.
Instructions on how to safely detach the camera's dome cover.
Guide on inserting a microSD card for storage into the camera slot.
Instructions for securely installing the camera on walls or ceilings.
Procedures for assembling, connecting cables, and powering the camera.
How to adjust the camera's lens for optimal viewing angles.
Steps to reattach and secure the camera's dome cover after installation.
Physical dimensions and measurements for both camera models.
Connecting the camera to a DirectIP NVR for simplified setup and management.
Connecting the camera to non-DirectIP NVRs or VMS for remote control.
Solutions for common problems encountered during camera operation.
Technical details, video specs, operating conditions, and dimensions.
The IDIS DC-D Series Installation Manual describes the DC-D4513RX and DC-D4513WRX network cameras, which are IP-based devices designed to compress and transmit video over Ethernet. These cameras can be managed using the IDIS Discovery program, IDIS Solution Suite Compact, or through an embedded web server (IDIS Web) for remote live viewing and recorded video scanning.
The DC-D series cameras are IP-based network cameras that offer robust video surveillance capabilities. They support DirectIP™ mode, allowing for simple setup with a DirectIP™ NVR without requiring a PC for configuration. They are also ONVIF protocol (Profile S) compliant, ensuring interoperability with various surveillance systems. The cameras feature multi-streaming for high-resolution and high-quality video monitoring, simultaneous recording, and flexible configurations. They utilize H.265, H.264 video compression, and M-JPEG still image compression algorithms, offering 4-stage video compression rates and multiple compression resolutions.
For enhanced reliability, the cameras include video stream buffering to counteract pre-/post-event buffering and network delays, improving network recording stability. Remote monitoring is possible via a web browser or remote software, and the cameras can automatically generate web casting code (HTML). They support up to 10 simultaneous remote monitoring connections.
Security features include IP filtering, HTTPS, SSL, IEEE 802.1X, and configurable user authority levels. Network bandwidth limitation and MAT features optimize network bandwidth usage. Easy network access is facilitated by UPnP (Universal Plug and Play) and embedded mDNS (Multicast DNS) protocols. The cameras incorporate Wide Dynamic Range (True WDR) for improved video quality in high-contrast situations and slow shutter support for better low-lighting video capture. A Day & Night feature with a built-in IR cut filter changer ensures clear images in varying light conditions. Firmware upgrades are quick and easy over the network, and redundant firmware with auto-recovery features enhances system stability. They offer network-based integrated management for multiple network cameras and multiple event detection modes. For data loss prevention during network interruptions, backup storage on a microSD memory card is available.
The DC-D4513RX model features a built-in microphone, while the DC-D4513WRX model boasts IP67-level water-resistant and dust-proof protection. Both models feature a fixed-focus megapixel lens.
General| Brand | Idis |
|---|---|
| Model | DC-D Series |
| Category | Security Camera |
| Language | English |
To Next Page
