What to do if Idis DC-T1833WHR Security Camera main unit won't turn on?
If your Idis Security Camera's main unit won't turn on, begin by checking the power cable connection to ensure it is securely plugged in. Also, verify that the power outlet is functioning correctly.
Why I can't see live videos on my Idis DC-T1833WHR Security Camera?
If you can't see live videos from your Idis Security Camera, first, check the camera's power status to ensure it is on. Then, verify the network connection status of both your computer and the network camera.
How to fix blurry images on Idis DC-T1833WHR?
If the images from your Idis Security Camera are blurry: * Ensure the lens is clean; if not, clean it with a soft cloth or brush. * Make sure the lens is in focus. * Adjust the camera's position or angle if there's too much light or a bright light source affecting the image.
General| Image Sensor | 1/2.8" CMOS |
|---|---|
| Lens Type | Fixed |
| Focal Length | 2.8 mm |
| Digital Noise Reduction | 3D DNR |
| Video Compression | H.265, H.264, MJPEG |
| Ingress Protection | IP67 |
| Resolution | 1920 x 1080 |
| IR Distance | 30 m |
| Day/Night | ICR |
| Wide Dynamic Range (WDR) | 120dB |
| Frame Rate | 30 fps |
| Network Interface | RJ45 (10/100Base-T) |
| Power Supply | 12V DC, PoE (IEEE 802.3af) |
| Operating Temperature | -30°C ~ +60°C |
| Weight | 350g (0.77 lb) |
| Minimum Illumination | 0.01 Lux (Color), 0 Lux (B/W with IR on) |
To Next Page
