●Click “Delete Printer”, click “Yes” to delete the printer, click “No” to cancel delete printer.
●Select the printer you currently use and connect it to the computer; Click “Connect Test”
to test if the is connected.
If connection is OK, the icon below will come out.
If connection fails, normally shows following icon.
1) Turn on the printer firstly, then select one port (depended on the printer you bought)
to connect to the PC. Much more information of connecting method is contained in “3.3
Peripherals Connection”.
2) When connection fail, please check if the connection and the port are matched.
(When USB port is used, it is better to make sure only one printer is connected)
To Next Page
Loading...
