Need help?Do you have a question about the IDTECK Star iCON100 and is the answer not in the manual?
General| Model | Star iCON100 |
|---|---|
| Power Supply | 12VDC |
| Tamper Switch | Yes |
| Max Events | 100, 000 |
| Reader Input Voltage | 12VDC |
| Certifications | CE, FCC |
| Communication Interface | TCP/IP, RS485 |
| CPU | 32-bit |
| Log Capacity | 100, 000 |
| Reader Port | 2 |
| Wiegand | 26/34 bit Wiegand |
| Input | 2 |
| Relay | 2 |
| Access Control Type | Standalone IP Access Controller |
| Operating Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
Explains how to configure the unit's network address using the DIP switch for proper communication.
To Next Page
