IDTECK Star RF TINY - Wire Color Table; Wire Connection to Controller

6
5. Wire Color Table of the RF TINY
6. Wire Connection to Controller
SIGNAL COLOR
Main Power (+12V) Red
Power Ground (GND) Black
ABA Track II CP Out Orange
Wiegand Data 0 Out /
ABA Track II Data Out
Green
Wiegand Data 1 Out /
ABA Track II Clock Out
White
Buzzer Control In Blue
LED Control In Yellow
RS232 (TX) Purple
Not Connect Brown
Not Connect Gray
* Please cut out tail connector before installation.
Red
Black
Orange
Green
White
Purple
Blue
Yellow
Brown
Gray
Access Controller
Main Power (+12V)
Power Ground (GND)
ABA Track II CP Out
Wiegand Data 0 Out /
ABA Track II Data Out
Wiegand Data1 Out /
ABA Track II Clock Out
RS232 (TX)
Buzzer Control In
LED Control In
Not Connect
Not Connect