To Next Page

To Previous Page

Innovative DisplayWorks

G-10f/GCG-10f

REPLACING THE DOOR LED LIGHTS

1 Unplug the cooler.

2 Remove

plastic

cover.

3 Disconnect top

light strand.

4 Disconnect

middle light

strand.

5 Unscrewlightstrand.

6 Remove entire light strand.

7 ToinstallLEDlightsfollowtheaboveinstructionsinreverseorder.

Notes:IfthereareanymalfunctionswiththemaincontrolpanelofLEDlights,

please contact a professional for replacement.

SETTING UP SPACER & POWER CORD HOLDERS

TheG-10f/GCG-10fissuppliedwithoneset(2pieces)ofSpacerstoholdthe

extralengthofPowerCord

1TakeoutthetwoSpacersandscrewssuppliedintheAccessoryPackshippedwith

the Cooler.

2UseaPhillipsscrewdrivertosecurethetwoSpacersontothe

rear of the cooler.

Questions and Answers:

Need help?

Do you have a question about the IDW G-10F and is the answer not in the manual?

IDW G-10F Specifications

General