IEC E055-71520330 User Manual

7
Join a Thermostat to Skyport
If the thermostat is connected to the local Wi-Fi access point but not yet
joined to an existing Skyport account, you may join the thermostat to the
account by doing the following:
1. Log in to your Skyport account.
2. Select the “Location” you want to add a thermostat into.
3. Select the “Thermostat tab”.
4. Select “+ Add thermostat”. A screen will ‘pop-up’ asking for a
six digit code.
5. Press the FAN button on the thermostat for 5 seconds.
6. Press the UP button on the thermostat.
7. A six digit code will appear on the thermostat’s display.
8. Enter the six digit code into your Skyport account.
Wi-Fi Status Screens
Press and hold the FAN button on the thermostat for 5 seconds.
When “Wi-Fi Setup” appears on the display, press the MODE button.
Pressing the UP or DOWN button will sequence through the following
information:
• AP Name
• AP Signal Strength
• IP Address
• MAC Address
• Skyport Status
• API Status
Connect to Wi-Fi

IEC E055-71520330 Specifications

General

Brand	IEC
Model	E055-71520330
Category	Thermostat
Language	English