14
User Setup: Backlight Operation
Programmable (setup step 4)
When the very simplest operation is desired,
this thermostat may be congured to be non-
programmable, with or without Auto-Changeover.
If “OFF” is selected, the thermostat will lockout
the Program On screen; only the Off, Heat,
Cool and Auto screens may be accessed by
pressing the MODE button.
Select “ON” if you would like your thermostat
to be programmable, then the PROGRAM
mode will be accessible through the use of the
MODE button.
Backlight (setup steps 5-8)
Backlight (setup step 5)
OFF - Backlight turns on only with
a button press and turns off after
8 seconds.
ON - Backlight is on continuously.
Night Light (setup step 6)
Selecting ON allows for turning off the
backlight of the display during specic times
of the day, usually at night.
Night Light Start Time (setup step 7)
12:00 am to 12:00 am
Night Light Stop Time (setup step 8)
12:00 am to 12:00 am
To Next Page
Loading...
Need help?
General
