To Next Page

To Previous Page

About Advanced Features & Operation: Factory Defaults

Factory Defaults

If, for any reason, you desire to return all the stored settings back to the

factory default settings, follow the instructions below.

WARNING: This will reset all Time Period and Advanced Programming

to the default settings. Any information entered prior to this reset will

be permanently lost.

1 Place the thermostat in the OFF mode.

2 Press and hold the MODE button.

While holding the MODE button,

press and hold the DOWN button

for 5 seconds.

All icons will appear on the display.

3 A. After all of the icons appear, release

the MODE and DOWN buttons.

B. Press and hold the FAN button for 2

seconds. Fd (Factory default settings)

and ALL will appear on the display.

MODE

FAN

MODE

(Continued)

Questions and Answers:

Need help?

Do you have a question about the IEC E055-71520330 and is the answer not in the manual?

IEC E055-71520330 Specifications

General