6EN
/
NVR/Camera/Screen
ConnectionV
/
06
⑥
WAN/LAN system
To connect to the Internet,
connect to your router with a LAN
cable.
⑦
USB terminal
Connect a mouse, USB memory
for backing up images, etc.
①
Preparation:
1. The ieGeek camera system/NVR.
2. A monitor or a TV.
3. A VGA cable or an HDMI cable. (Many monitors/ TVs have
them as standard accessories)
4. A router for Internet connection.
②
Steps to set up the system
(Please connect the POE camera systems as below picture. )
③①
② ⑦ ⑨ ⑤
⑥ ⑧
④
⑩
①
11
①
Connect the P power
camera
⑦
Insert the VGA cable
②
Plug in the LAN cable
⑧
Connect the TV monitor
③
Plug in the AC adapter
for power supply
⑨
Plug in the HDMI cable
④
Connect the router
⑩
Insert the USB mouse
⑤
Plug in the LAN cable
①
Turn on the power
switch
⑥
Connect the PC monitor
11
To Next Page
