7EN
/
NVR/Camera/Screen
Connection
/
07
①
Connect the monitor/ TV to the NVR via its HDMI or VGA port.
②
Connect the USB mouse to the USB port of NVR.
③
Connect the NVR's UP LINK (WAN) port to your router with a
network cable.
④
Connecting NVR and POE cameras via network cable which
included in the package.
⑤
Connect the NVR to the DC48V power adapter, and then
plug the power adapter into AC power socket powered by
AC Electric Supply.
⑥
Turn on the NVR and wait for a while, then you can operate
the system.
Tips:
• NVR power adapter output DC48V power supply (DC48)
Please plug it into the NVR power port rst. Next, plug the
power adapter into the AC power socket.
• DC48V power adapter is only used for NVR. Do not use it for
security cameras.
Note:
Please refer to [
WHAT'S IN THE BOX
] for accessories.
To Next Page
Loading...