08
Riding Basics
1.Turn the power on, and check the battery
level indicator.
2.Stand with one foot on the deck and one
foot on the ground. Scoot yourself with the
foot on the ground.
3.When the scooter starts to move forward,
put both feet on the deck and press the
accelerator. (The accelerator initiates once
the speed exceeds 3 mph.)
4.Release the accelerator and the kinetic
energy recovery system (KERS) initiates
automatically to brake slowly; And squeeze
the brake lever for a sudden brake.
5.Tilt your body to the steering direction as
you turn, and slowly turn the handlebar.
Warning: Wear a helmet, elbow pads and knee
pads. Please read the instruction carefully before
using. Do not touch the brake system. Refer to
the instruction for more information
To Next Page
Loading...
