07
First Ride
1. Turn on the key, press the power switch for 1-3 seconds, and then release it.
The LCD displays on - indicating that the electric scooter has been
successfully opened.
2.After power on, press the headlamp button to turn on the headlamp, and push
up the off / on button to turn on the side lamp, spotlight and rear tail lamp
3. Zero start: after power-on, press the accelerator and the motor of the
scooter will rotate, and the scooter will go forward. (The throttle works
even when the E-scooter is not in motion.)
4. Non-zero/Kick-and-go start: With kick-and-go start mode on, scoot the
E-scooter for the throttle to operate.
Press the dual drive switch to switch between dual drive or single drive
5.Riding mode: after power on, press M key to switch between 1 / 2 / 3 gears.
Power Switch
To Next Page
Loading...
