IFEX Technologies GmbH IFEX 3000 Impulse Fire Fighting Technology N°: IF3000-130
Instruction Manual
Instructions for Use and Operation
Page | 8
Hansestraße 18, 27419 Sittensen
Type IFEX 3072 Fire Extinguishing Unit with hose reel Date: 30.11.12
Page | 8
WARNING!
Before testing of the IFEX 3000 Impulse fire extinguishing equipment:
1. Make sure the air pressure valve is closed.
2. Use the drain valve at the water container to release remaining pressure
3. Make sure there is no remaining pressure in the IFEX Gun or hose. This is done
by triggering the gun repeatedly until the remaining air in the hoses and the gun
is evacuated.
Caution!
Put on the gun according to the user manual as there may be a recoil due to the
remaining air in the gun.
1. Testing of the equipment
To ensure the perfect functioning of the equipment it is required to have it tested
by an expert at least once a year. The periods between testing of the equipment may
need to be reduced if this is required by local regulations.
1.1 Visual testing
Test the equipment's general condition (cleanliness, condition of the fittings, the
hoses, the water container, the pressure containers, the safety equipment, the gun,
the hose connections, the hose reel with safety catch, sledge mounting, the inscriptions
of the air cylinders). Equipment and fittings which are damaged will
need to be replaced immediately.
1.2 Spare parts
Use certified spare parts only. IFEX-original parts are certified.
1.3 Testing of the fire fighting equipment
according to the testing regulations for "IFEX 3072 Impulse fire fighting equipment".
1.4 Preparation
Before use of the fire fighting equipment IFEX 3072 according to the filling
instructions for "IFEX 3072 Impulse fire fighting equipment" as per para 8.0.
To Next Page
Loading...
