10. Balanced XLR analogue line output
Connection of 4.4mm to XLR or similarly balanced interconnects.
11. Unbalanced RCA analogue line Output
Single-ended unbalanced signal output to an amplier.
12. Unbalanced 3.5mm analogue line input
Connect to an analogue line level audio source with stereo 3.5mm connector.
13. Clock sync input
Connect to an external clock source (10MHz) (Optional)
Tip: To use this feature, set External Sync Clock in the menu to On.
If no 10MHz clock is detected, or if there is an error in the external clock, the display will indicate the error and the NEO iDSD 2 will
automatically switch back to its internal clock.
A sine or square wave signal may be used, 1Vpp nominal, 75Ω.
14. Coaxial Digital input
Connect an S/PDIF source such as Apple TV, Google Chromecast, PS5, a high-end CD transport, etc.
15. Optical Digital input
Connect an S/PDIF source such as Apple TV, Google Chromecast, PS5, Xbox, a high-end CD transport, etc.
16. USB audio input
This is a USB3.0 B input (USB2.0 compatible). For a superior connection to a computer, use the
enclosed USB3.0 cable. It connects the NEO iDSD 2 to the computer audio source.
11
To Next Page
Loading...
