8
4. Power On/O and Brightness
Power ON/OFF
Long press the power switch to power on/o.
Screen Brightness (Short press)
High High brightness mode. The display brightness always remains High.
Med Medium brightness mode. The display brightness always remains Medium.
Low Low brightness mode. The display brightness always remains Low.
O Sleep mode. If no operation is performed within 10 seconds, the display will turn o.
5. Input selector/Bluetooth pairing
This cycles between the following inputs:
Note: Please select the input channel according to your audio source. For example, when using USB input, you need to switchthe input channel to
"USB".
Note: When Auto mode is selected, the input signal is detected and the input channel is automatically switched.
The NEO iDSD 2 receives Bluetooth signals via aptX Lossless, aptX Adaptive, aptX, LDAC, LHDC/HWA, AAC and SBC.
USB
Bluetooth Auto Line (3.5mm) Coaxial
Optical
A
To Next Page
Loading...
