II) Gain
Can be switched between these four gain modes (see item 6 for details):
iEMatch > Normal > Turbo > Nitro
III) Volume Sync
Turns the volume sync on/o. It is o by default.
IV) BT voice prompt
Turns the bluetooth voice announcement on/o. It is o by default.
V) External Sync Clock*
10MHz External Sync Clock input on/o. It is o by default.
When set to "On", if no 10MHz clock is detected, or if there is an error in the external clock signal, the
display will indicate the error and the NEO iDSD 2 will automatically switch back to its internal clock.
VI) Line output volume ctrl (control)
Turns the line output volume control on/o. It is o by default.
This mode will determine whether the NEO iDSD 2 analogue line output section volume control is used.
6
To Next Page
Loading...
