ifi PHANTOM Series - Page 20

Balanced XLR 3-Pin Signal Line Input
Balanced XLR line input.
Unbalanced RCA 1-3 Signal Input
Connect Unbalanced (S-E) input.
Bias Setting Memory Card Storage Back Cover
Magnetically attached cover containing 6 memory cards for voltage bias settings from 500VDC to 640VDC.
This attachment can also be used to cover the front output panel when not in use or when the iCAN Phantom is used as
a preamplier.
Tip: For information regarding the 6 memory cards please refer to item 5.
Balanced XLR 3-Pin Line Output
Balanced XLR line output. This output may be connected to an active speaker or balanced amplier.
Please ensure the connected device does not connect pin 3 (negative phase signal) to ground.
Unbalanced RCA Line Output
UnBalanced analogue signal output to an amplier.
DC Power Supply Input
DC 12V/4A - 15V/3A* power input. Please connect iCAN Phantom to the enclosed power supply.
Tip: Any 9v to 18v DC power source with a typical 25W ( maximum 75W) rating can be used with the iCAN Phantom (including vehicular, RV and boat based 12V
DC power). The iCAN Phantom uses double-conversion power supplies that make it impervious to power supply noise and related problems. However, we strongly
recommend the use of the included iPower Elite. It oers the latest in power supply technology and is better and cleaner than battery and aftermarket linear
power supplies.
22.
23.
24.
25.
26.
27.
18