ifi PHANTOM Series - 12. Balanced XLR L;R, Stereo Unbalanced 6.3 mm - and + Phase Output; Balanced XLR and 6.3 mm Phase Outputs; UnBalanced 6.3 mm Outputs

To Next Page

To Previous Page

iEMatch Adjustment

The iEMatch adjustment button. o by default.

This feature reduces the output level, so that even the most sensitive In-Ear-Monitors (IEMs) can be matched to the

iCAN Phantom.

iEMatch can increase the dynamic range of sensitive IEMs by reducing background amplier hiss.

Tip: S-Balanced 3.5mm headphone output reduces the level by 6dB and balanced 4.4mm headphone output lowers it by12dB .

Balanced XLR L/R , Stereo Unbalanced 6.3mm - and + Phase Output

Balanced

XLR – 3 Pin x 2

6.3mm TRS x 2 (iFi SEC balanced system)

Note: The iFi SEC (Unbalanced Compatible) balanced connection uses one 6.3mm jack for L-/R- (left jack) and the other for L+/R+ (right jack) with both sleeves being

Ground (GND). This makes it directly compatible with standard non-balanced headphones. With the correct headphone cable it allows a balanced connection using two

6.3mm plugs.

UnBalanced

6.3mm TRS x 2 (please use the right jack for unbalanced headphones. You can, however, drive two separate headphones

simultaneously if desired).

11.

12.

ONOFF