ifi PHANTOM Series - Operating Status LED; Balanced 4.4 Mm Headphone Output; Unbalanced 3.5 Mm Headphone Output

17
Operating status LED
19. Balanced 4.4mm Headphone Output
Connect balanced 4.4mm headphones.
Tip: If possible, always use balanced headphones to take full advantage of the true balanced nature of the iCAN Phantom circuitry.
Unbalanced 3.5mm Headphone Output
Connect 3.5 mm stereo headphones (compatible with unbalanced TRS and balanced TRRS congurations). This is a
Unbalanced output.
Dual Damped Anti-Vibration Foot Post
Base support, please set the iCAN Phantom on a at surface.
Tip: The double layer damped anti-vibration footbed is specically designed to provide the ultimate in vibration control. It consists of a double sandwich of a
customised elastomer (silicone layer and a copolymer layer of ethylene and vinyl acetate) and a metal alloy (AL-Mg-Si aluminium alloy with hollow internal
structure), allowing for minimisation of resonance in the iCAN Phantom chassis.
18.
19.
20.
21.
Warming-up
(Green)
Solid-State
(Blue)
Tube
(white)
Tube+
(Yellow)
Protection
(Red)
Mode switching
(Flashing)