ifi PHANTOM Series - Specifications

Test conditions: Gain = 0dB, 0.775V(0dBu) with 300 Ohm load unless stated otherwise SNR Balanced re 27V, SNR SE re. 14V
Specications:
Gain : 0dB, 9dB and 18dB user-selectable
Frequency Response: 0.5Hz to 500kHz(-3dB)
THD & N: Balanced unBalanced
Solid-State ≤0.0015% ≤0.007%
Tube ≤0.002% ≤0.006%
Tube+ ≤0.012% ≤0.2%
SNR: >145dB(A) > 130dB(A)
Output Power: >15,000mW (@ 16Ω) >5,760mW (@ 16Ω)
Output Voltage: >27V (@ 600Ω) >14V (@ 600Ω)
Inp
ut voltage: DC 12V/4A or 15V/3A (iCAN Phantom)
Input voltage: AC 85 – 265V, 50/60Hz (iPower Elite)
Power consumption: < 27W idle, 75W max.
Dimensions: 256 x 185 x 120 mm (10.1" x 7.3" x 4.7")
Net weight: 4.2 kg (9.3 Ibs)
Limited Warranty: 12 months
*12 months typical or as permitted/required by local reseller laws.
**Specications are subject to change without notice.
32
This material mentions various third-party trademarks solely to indicate compatibility and for identication purposes. All trademarks and logos are the property
of their respective holders. Use of them does not imply any aliation or endorsement by them. This information is provided "as is" with no warranties, and use of
it is at the user's own risk.
DISCLAIMER