Time zeroRunning time
6
(i) ESL Default
Turns ESL Default on/o, o by default.
When ESL Default is set to "ON", the Electrostatic headphone power (item 2) is automatically switched on every time the power
is switched on (item 4) and no longer needs to be switched on manually.
(ii) Brightness
TFT display screen brightness setting, default setting "High".
AUTO Sleep mode. If no operation is performed within 10s, the display will turn o.
Low Low brightness mode. The display brightness always remains low.
High High brightness mode. The display brightness always remains high.
(iii) Tube Runtime
You can view the elapsed time of the vacuum tubes, or reset the timer to zero. This may be done when a new pair of vacuum
tubes is inserted.
AUTO Low High
Exit
0hr
Reset
0hr
To Next Page
Loading...
