ifi Pro series iCAN - LED Logo (Illuminated); Power Switch; Input Selector; Bass Correction System

LED Logo
Warming-up: Orange (ashing)
Tube/Tube+ mode: Orange
Solid-State mode: White
Protection: Red
Tip: See Section 5 for details of the dierent operation modes.
Power Switch
ON/OFF.
Note: When switched on, the Pro iCAN will go through a warm-up sequence of 45 seconds before it is operational.
Input Selector
Input 1-3: RCA, single-ended.
Input balanced: XLR, balanced.
Tip: Even if single-ended RCA inputs are used with balanced outputs, the Pro iCAN will still operate in fully-balanced mode for
the highest sound quality.
Bass Correction System
Dierent recordings and dierent headphones exhibit dierent frequency responses. is an analogue signal processing
(ASP) circuitry. It is sonically superior to Digital Signal Processing (DSP) systems. is tailored to correct the bass deciency
in the headphone/loudspeaker and achieve the desired level. It is NOT a traditional tone or loudness control. The maximum
boost is 12dB and the frequency at which this maximum boost it achieved is as follows:
4
1.
2.
3.
4.
®
®
®